3-Way Brass Valves

The Atlas three-way motorised ball control valve is designed for use in HVAC systems.

ATLAS üç yollu pirinç vana – ısıtma ve hidronik tesisat uygulamaları için ürün görseli

LoRaM-BusM-BusWIRELESSRS-485

Why Choose ATLAS Three-Way Brass Valves?

ATLAS three-way brass valves are designed to mix fluids or divert flow between branches in hot- and cold-water HVAC installations. With a suitable actuator, proportional control helps adjust flow to demand in air handling units, boiler rooms and heat pump circuits.

An internally threaded brass body and stainless steel ball provide a durable structure. DN20, DN25, DN32 and DN40 body options accommodate different installation sizes. A model suitable for the required mixing or diverting duty can be selected for the hydraulic circuit.

The product table lists Kvs values of 6.3 m³/h for DN20, 10 for DN25, 16 for DN32 and 25 for DN40. These data support selection based on design flow and pressure loss rather than pipe diameter alone.

Key benefits

Mixing or diverting functions in suitable models.
Brass body, stainless steel ball and DN20–DN40 options.
Proportional control with a suitable actuator and model-specific Kvs data.

The Atlas three-way motorised ball control valve is designed for use in HVAC systems. It can be used in systems such as air handling units, boiler rooms or heat pumps. With its PN10–PN16 body, it operates reliably across a wide temperature range and withstands high pressures.

There are also series available for use as diverting/directing valves in industrial or specialised applications.

DN20, DN25, DN32 and DN40 body options
Can be used as a mixing or diverting/directing three-way valve
Internal threaded brass body
PN10 pressure rating
Stainless steel ball
Proportional control
Fully leak-proof
Operating range 10…120 °C
For cold and hot water, open and closed systems
Rotation angle 90° (operating range 15…90°)

Tip	Kvs value [m³/h]]	Link	Length [mm]	Width [mm]	Height [mm] With engine fitted	Height [mm] (without motor)
DN20	6,3	G 1’’	84	60	150	63
DN25	10	G 11/4’’	88	66	160	65
DN32	16	G 11/2’’	97	75	170	77
DN40	25	G 2’’	106	82	180	84

Atlas 3-Way Valve Price List

Ask about your discount · Message us on WhatsApp

General Construction and Materials
General Construction and Materials	Intended Use	Use as a mixing and diverting valve
	Body Material	Brass Housing with Internal Gears
	Ball Material	Stainless steel
	Areas of Application	HVAC (Air-handling units, boiler rooms, heat pumps), Industrial applications
Product Features
Product Features	Fluid Compatibility	Cold and hot water, Open/Closed systems
	Control Type	Proportional Control
	Angle of Rotation	90° (Operating range 15–90°)
	Leak-proof	Complete watertightness
	Pressure Resistance	PN10 – PN16 (Nominal Pressure: 1.6 MPa)
	Operating Temperature	General: 10–120 °C / Motorised models: 2–95 °C
Electrical Specifications (Engine)
Electrical Specifications (Engine)	Input Voltage	AC 220V, 50/60Hz
	Torque	6 N.m